When you hire a solar company, the panels on the roof are the part you see. Much of the work happens before a single panel goes up and after the last one is wired: engineering, permits, equipment, inspections, and the utility approval that lets the system switch on. Knowing what that work involves makes it much easier to understand a proposal, a schedule, and who is responsible for what.
This guide walks through what a full-service solar company handles, step by step, for a home or a commercial building in Illinois. Windfree Solar has been designing and installing solar in Illinois and the Midwest since 2009, with 1,200+ systems installed across ComEd and Ameren territories.
Summary
- A full-service solar company carries the whole project: sales, engineering, permitting, procurement of materials, interconnection, inspection and permission to operate.
- Solar is custom. Sun exposure, the roof, the electrical service and how the building uses power shape every system.
- Windfree hires small installation contractors for the on-site work and manages every other step, so the project is complete from start to finish.
- The utility has to approve the system before it can run. Handling that back and forth with ComEd or Ameren is part of the job.
- The relationship continues after the system is on, through warranty and service.
What “Full Service” Means for a Solar Company
On any solar project, someone has to design a system that fits the building, get it approved by the local permitting office, source equipment that is actually available, get it installed safely, pass inspection, and get the utility to sign off. A full-service solar company, sometimes called turnkey, takes responsibility for all of it.
For larger commercial and public work, the same idea is often described as engineering, procurement and construction, or EPC. Windfree is an EPC firm, which is what qualifies us for public and municipal solar work. Whether the project is a home, a garage or a new commercial building, the point is the same: one company owns the whole scope, so the owner is not left coordinating the pieces.
Who Actually Does the Installation
This is a fair question to ask any solar company, and the answer is worth hearing plainly. Windfree hires small contractors to install. They are crews that typically cannot or do not want to take on the full turnkey work and everything it requires: sales, engineering, permitting, procurement of materials, interconnection, inspection and permission to operate. That lets them focus on the on-site work, and it lets us make sure the project is complete every step of the way.
On commercial work, labor requirements can also shape the crew. Solar incentives in Illinois come with very specific labor rules, and Windfree works with both union and non-union crews. Project teams should not have to become experts in solar labor compliance; that is our job.
What a Solar Company Handles, Step by Step
Every project is different, but the work moves through the same core steps.
- The first conversation. What you want the system to do, what kind of building it is going on, and what questions you have. Listening comes before designing.
- Site review. Solar is custom. Sun exposure, shade from trees or neighboring buildings, the roof’s type and condition, the electrical service and how the building uses power all decide what a system can be. A better site produces a better return.
- Engineering and design. The system is laid out to fit the roof and the electrical service, including how it ties into the building. On a new commercial build, this means working from architectural plans and respecting design intent.
- Permitting. We handle the permits the project needs.
- Procurement of materials. Panels, inverters and racking are sourced for the project. When a commercial spec calls for products that are outdated, discontinued or unavailable, we identify the closest viable alternatives and coordinate approvals, so the design stays buildable and warrantable.
- Installation. The crew installs racking, modules and inverters, with the roof and finishes protected. Roof attachments are coordinated with the roofer, and non-penetrating mounting is used where the roof allows it.
- Inspection. The finished system is inspected and tested.
- Interconnection and permission to operate. ComEd and Ameren each run their own interconnection process, and it takes time. Windfree handles all of the utility back and forth and commissions the system through to permission to operate (PTO), the utility’s approval to switch the system on.
If you want a first look before that first conversation, our solar potential calculator draws a solar design on your own roof from your address. It is a starting point, and the site review fills in what an aerial image cannot see.
On a New Building, the Steps Start Earlier
On new construction, solar is the last trade in physically, but it should be contracted at the beginning. The overall timeline runs 10 to 18 months from bid to permission to operate. Several details that matter to the solar system get decided long before the array arrives:
- Conduit and interior routing. Runs are planned during rough-in, while the walls are still open.
- Crane and site access. Access needs get flagged before landscaping and finishes go in.
- Roof attachments. Coordinated with the roofer so the roof warranty is respected.
- Labor requirements. Confirmed at bid and contract, not discovered later.
Windfree works within whatever contracting structure fits the project: owner-direct, through the general contractor, or through the electrical contractor. Our guide to what an Illinois commercial solar project looks like from bid to permission to operate covers each phase in more detail.
What This Looked Like at Heartland Community College
Heartland Community College’s Net Zero Agricultural Building in Normal, Illinois, carries a 216 kW rooftop array. Windfree delivered it through the electrical contractor as the design-assist and turnkey installer, with an IBEW union installation.
- About 75% of the array sits on a pitched standing seam roof with clip-on attachments, and about 25% on a flat roof with fully ballasted racking. There are zero roof penetrations across the entire array.
- Midway through the project, the work moved from a non-union crew to a union crew. The crew remobilized in about one to two weeks, and the project stayed under budget and on schedule.
- The building achieved net zero status, with no roof warranty conflicts.
The full story is in our Heartland Community College case study, and you can see more of our work on the projects page.
After the System Is On
A solar system is a long-term part of the building, so the company behind it matters after installation too. Windfree is a Solar Insure certified provider, which not every installer can be. On qualifying systems, that means a 30-year warranty covering equipment and labor.
Existing Windfree customers can reach our service team at service@windfree.us or by calling 312-588-6953, extension 3.
Where Incentives Fit
Illinois Shines is a state incentive that supports solar PV development through the purchase of renewable energy credits (RECs), and Windfree Solar is an Approved Vendor under the Illinois Shines program. Incentive rules change, and how any of them applies to you depends on your situation and whether the project is residential or commercial. Our post on updated solar incentives for Illinois in 2026 covers the current picture. Check with your tax advisor. We don’t give tax advice.
Working With Windfree Solar
Windfree Solar has installed 1,200+ systems across Illinois and the Midwest since 2009. We are a Certified Minority Owned Business (MBE) and an Equity Eligible Contractor (EEC), and our commercial clients include Turano, Guinness, Revolution Brewing and Heartland Community College. Solar can go on almost any building, from homes and garages to schools, breweries and new commercial construction.
Frequently Asked Questions
Does Windfree install the panels with its own crews?
We hire small installation contractors for the on-site work and handle everything else ourselves: sales, engineering, permitting, procurement of materials, interconnection, inspection and permission to operate. That way the crew can focus on the installation and we make sure the project is complete every step of the way.
Who deals with ComEd or Ameren?
We do. Windfree handles all of the utility back and forth and commissions the system through to permission to operate, the utility’s approval to switch the system on.
Can Windfree work through our general contractor or electrician?
Yes. We work owner-direct, through the general contractor, or through the electrical contractor, whichever structure fits the project.
Our project has union or prevailing wage requirements. Can you work within them?
Yes. Windfree works with both union and non-union crews and confirms labor requirements at the bid and contract stage.
What happens if something goes wrong after installation?
Windfree is a Solar Insure certified provider, and qualifying systems carry a 30-year warranty covering equipment and labor. Existing customers can reach our service team at service@windfree.us or 312-588-6953, extension 3.
Start the Conversation
Solar is custom, and the best way to see what a solar company would do for your building is to talk it through. Contact Windfree Solar, email sales@windfree.us, call 312-588-6953, or stop by the Windfree Solar Cafe at 517 Dempster Street in Evanston.





